ISTA-ASTM Sample Submission Sheet

Below are fields that are necessary to write the report(s) for your sample(s). Please fill out all fields to the fullest extent. If a field does not apply to your test sample, please enter “N/A” and we will remove that field from the report.

Company Name(Required)

Quote Number

Number of Packages to be Tested(Required)

Unit 1

Unit 1: Product Name(Required)

How the product will be identified in the report

Unit 1: Product Description(Required)

Describe product and its use

Unit 1: Manufacturer(Required)

Unit 1: Associated ID Numbers:

Unit 1: Reference Number(s)

Unit 1: Model Number(s)

Unit 1: Serial Number(s)

Unit 1: Part Number(s)

Unit 1: Other (Please Specify)

Unit 1: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 1: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 1: Weight(Required)

Specify: lbs., kgs, or other

Unit 1: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 1: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 1: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 1: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 1: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 1: Additional Comments

Unit 2

Unit 2: Product Name(Required)

How the product will be identified in the report

Unit 2: Product Description(Required)

Describe product and its use

Unit 2: Manufacturer(Required)

Unit 2: Associated ID Numbers:

Unit 2: Reference Number(s)

Unit 2: Model Number(s)

Unit 2: Serial Number(s)

Unit 2: Part Number(s)

Unit 2: Other (Please Specify)

Unit 2: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 2: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 2: Weight(Required)

Specify: lbs., kgs, or other

Unit 2: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 2: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 2: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 2: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 2: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 2: Additional Comments

Unit 3

Unit 3: Product Name(Required)

How the product will be identified in the report

Unit 3: Product Description(Required)

Describe product and its use

Unit 3: Manufacturer(Required)

Unit 3: Associated ID Numbers:

Unit 3: Reference Number(s)

Unit 3: Model Number(s)

Unit 3: Serial Number(s)

Unit 3: Part Number(s)

Unit 3: Other (Please Specify)

Unit 3: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 3: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 3: Weight(Required)

Specify: lbs., kgs, or other

Unit 3: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 3: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 3: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 3: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 3: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 3: Additional Comments

Unit 4

Unit 4: Product Name(Required)

How the product will be identified in the report

Unit 4: Product Description(Required)

Describe product and its use

Unit 4: Manufacturer(Required)

Unit 4: Associated ID Numbers:

Unit 4: Reference Number(s)

Unit 4: Model Number(s)

Unit 4: Serial Number(s)

Unit 4: Part Number(s)

Unit 4: Other (Please Specify)

Unit 4: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 4: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 4: Weight(Required)

Specify: lbs., kgs, or other

Unit 4: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 4: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 4: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 4: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 4: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 4: Additional Comments

Unit 5

Unit 5: Product Name(Required)

How the product will be identified in the report

Unit 5: Product Description(Required)

Describe product and its use

Unit 5: Manufacturer(Required)

Manufacturers of any of the sample components that need to be listed in report

Unit 5: Associated ID Numbers:

Unit 5: Reference Number(s)

Unit 5: Model Number(s)

Unit 5: Serial Number(s)

Unit 5: Part Number(s)

Unit 5: Other (Please Specify)

Unit 5: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 5: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 5: Weight(Required)

Specify: lbs., kgs, or other

Unit 5: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 5: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 5: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 5: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 5: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 5: Additional Comments

Unit 6

Unit 6: Product Name(Required)

How the product will be identified in the report

Unit 6: Product Description(Required)

Describe product and its use

Unit 6: Manufacturer(Required)

Unit 6: Associated ID Numbers:

Unit 6: Reference Number(s)

Unit 6: Model Number(s)

Unit 6: Serial Number(s)

Unit 6: Part Number(s)

Unit 6: Other (Please Specify)

Unit 6: Package Description(Required)

Ex: “Corrugated Cardboard Container with pulp inserts”

Unit 6: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 6: Weight(Required)

Specify: lbs., kgs, or other

Unit 6: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 6: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 6: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 6: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 6: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 6: Additional Comments

Unit 7

Unit 7: Product Name(Required)

How the product will be identified in the report

Unit 7: Product Description(Required)

Describe product and its use

Unit 7: Manufacturer(Required)

Unit 7: Associated ID Numbers:

Unit 7: Reference Number(s)

Unit 7: Model Number(s)

Unit 7: Serial Number(s)

Unit 7: Part Number(s)

Unit 7: Other (Please Specify)

Unit 7: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 7: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 7: Weight(Required)

Specify: lbs., kgs, or other

Unit 7: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 7: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 7: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 7: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 7: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 7: Additional Comments

Unit 8

Unit 8: Product Name(Required)

How the product will be identified in the report

Unit 8: Product Description(Required)

Describe product and its use

Unit 8: Manufacturer(Required)

Unit 8: Associated ID Numbers:

Unit 8: Reference Number(s)

Unit 8: Model Number(s)

Unit 8: Serial Number(s)

Unit 8: Part Number(s)

Unit 8: Other (Please Specify)

Unit 8: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 8: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 8: Weight(Required)

Specify: lbs., kgs, or other

Unit 8: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 8: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 8: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 8: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 8: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 8: Additional Comments

Unit 9

Unit 9: Product Name(Required)

How the product will be identified in the report

Unit 9: Product Description(Required)

Describe product and its use

Unit 9: Manufacturer(Required)

Unit 9: Associated ID Numbers:

Unit 9: Reference Number(s)

Unit 9: Model Number(s)

Unit 9: Serial Number(s)

Unit 9: Part Number(s)

Unit 9: Other (Please Specify)

Unit 9: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 9: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 9: Weight(Required)

Specify: lbs., kgs, or other

Unit 9: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 9: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 9: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 9: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 9: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 9: Additional Comments

Unit 10

Unit 10: Product Name(Required)

How the product will be identified in the report

Unit 10: Product Description(Required)

Describe product and its use

Unit 10: Manufacturer(Required)

Unit 10: Associated ID Numbers:

Unit 10: Reference Number(s)

Unit 10: Model Number(s)

Unit 10: Serial Number(s)

Unit 10: Part Number(s)

Unit 10: Other (Please Specify)

Unit 10: Package Description(Required)

Ex: “Corrugated Cardboard Container” or “Pallet with wrap and metal banding”

Unit 10: Dimensions(Required)

Length (in.)

Width (in.)

Height (in.)

Unit 10: Weight(Required)

Specify: lbs., kgs, or other

Unit 10: Product Damage Tolerance(Required)

What in regards to the product is considered “passing”? Ex: Product functional, no scuffing

Unit 10: Product Degradation Allowance(Required)

What in regards to the product is considered “passing”? Ex: Package intact, no protrusions

Unit 10: Will Keystone inspect Inner Contents of Package(s)?(Required)

Yes

Unit 10: Number of Units to be Inspected(Required)

If multiple inner units, please indicate number of units to be inspected.

Unit 10: Number of Units to be Documented(Required)

Ex: “Report most damaged units Only” “Report # Units”

Note: Keystone will typically take most damaged units for inspection unless otherwise instructed above.

Unit 10: Additional Comments

Package Testing Types

Package Testing Capabilities

Cold Chain

Aging

Industries

Contact Us